Kabelporter H is the system table for horizontal work. It holds Devboard and Prodboard assembly boards with a width of 3 feet.

Depending on the size of your harnesses, we supply the Kabelporter H in 3-foot increments from 3 feet = 915 mm to 27 feet = 8,235 mm.

Your employees can adjust the height of the assembly board to a comfortable and variable working height with the push of a button. This increases the motivation and health of your employees. The height of the assembly board ranges from 780 mm to 1,180 mm.

In the working position, the Kabelporter is stable on its feet. When the feet are fully retracted, Kabelporter stands on its transport legs and is equipped with smooth-running castors. Now you can easily move it around and divide up your production area for optimal material flow.

Assembly boards with a length grid of 3 feet fit onto the Kabelporter in any order. Unlock and lock all assembly boards with a single handle. The side covers can only be screwed on when they are properly locked.

The transfer modules from the flat cables of the measurement controllers to the modular cables of the assembly boards are located under the covers. The excess length of the measurement cables can be laid in the cable holders, which can be distributed as required.